Rear Console Box: Installation

WARNING: This page is about a different car, the 2008 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL REAR CONSOLE BOX
1. Connect each of the clamp and the connector.
2. Keeping the rear console box pulled in the rear direction of the vehicle, install the 6 bolts to the left and right sides.
  
  Fig 1: Identifying Rear Console Box Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Connect the console box lock control cable assembly and install the rear console box.
  
  Fig 2: Identifying Console Box Lock Control Cable Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL CONSOLE BOX HOLE COVER
1. Slide the front seat assemblies RH and LH forward.
2. Slide the rear console box fully to the back end and install the console box hole cover.
  
  Fig 3: Identifying Console Box Hole Cover
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL CONSOLE BOX NO. 2 HOLE COVER
HINT:

Use the same procedures for the console box No. 2 hole cover and the console box hole cover.