FixVault
Home › Lexus › 2004 › RX 330 AWD › Repair and Diagnosis › Transmission › Automatic Trans › Servicing › Removal & Installation › Park/Neutral Position Switch › Removal

Park/Neutral Position Switch: Removal

  1. Remove battery. See Figure.
  2. Remove air cleaner assembly.
  3. Remove air cleaner hose No. 1.
  4. Remove air cleaner inlet No. 2.
  5. Remove air cleaner bracket.
  6. Remove air cleaner inlet No. 1.
  7. Remove intake air resonator sub-assembly.
    8. NOTE: Do not hold resin guide pipe.
  8. Disconnecting transaxle control cable:
    1. Remove nut from control shaft lever. See Figure.
    2. Disconnect control cable from lever.
    3. Remove clip and disconnect control cable from bracket.
  9. Removing park/neutral position switch:
    1. Disconnect park/neutral position switch connector.
    2. Remove nut washer and control shaft lever.
    3. Using a screwdriver, pry off lock plate. See Figure.
    4. Remove lock nut and lock plate.
    5. Remove 2 bolts and pull out park/neutral position switch. See Figure.
About FixVault