Front Speed Sensor: Removal

WARNING: This page is about a different car, the 2008 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

Use the same procedures for the RH side and the LH side.
The procedures listed below are for the LH side.

REMOVE FRONT WHEEL
REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH (See REMOVAL )
REMOVE FRONT SPEED SENSOR
1. Disconnect the speed sensor connector.
2. Remove the 2 bolts and the clamp from the body and the shock absorber assembly.
  
  Fig 1: Locating Body And Shock Absorber Assembly Bolts And Clamp
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Remove the bolt and the speed sensor front.
  NOTE: Prevent foreign matter from attaching to the sensor tip.