FixVault

VSC Off Switch: Inspection

WARNING: This page is about a different car, the 2008 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT VSC OFF SWITCH 
    1. Measure the resistance according to the value(s) in the table below.

      Standard resistance 

      RESISTANCE REFERENCE

      Tester Connection Switch Condition Specified Condition
      2 - 1 Switch is pushed in Below 1 Ω
      2 - 1 Switch is not pushed in 10 kΩ or higher

      If the result is not as specified, replace the switch.

      Fig 1: Inspecting VSC Off Switch
      G05842001Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002