Side AIR Bag Module
WARNING: This page is about a different car, the 2003 Lexus LS 430. However, it is still accessible from the selected car via links, so may be relevant.
- Before proceeding, see AIR BAG SAFETY PRECAUTIONS . Disconnect negative battery cable. Remove appropriate side air bag. See SIDE AIR BAG MODULES under REMOVAL & INSTALLATION. Install 2 nuts with washers onto stud on side air bag module. See Fig 1.
- Wrap strong wire around studs and secure air bag module to scrap tire. Tire should be at least 7.28" (185 mm) wide and inner diameter should be at least 14.17" (360 mm). Place this tire between 4 other tires (top tire should have wheel installed). Securely tie all tires together with wire. See Figure.
- Connect Deployment Tools (09082-00700) and Adapter (09082-00750) to side air bag connector. Position deployment tool at least 33 feet (10 m) away from side air bag. Press activation switch to deploy side air bag. Because of heat, wait 30 minutes before handling side air bag. Seal deployed air bag in vinyl bag and dispose of in usual manner.