Torque Specification

WARNING: This page is about a different car, the 2005 Toyota Sienna. However, it is still accessible from the selected car via links, so may be relevant.

Drive Shaft/Propeller Shaft/Axle Torque Specification

Part Tightened		N.m	kgf.cm	ft.lbf
Intermediate shaft x Center support bearing assy No. 1
1st		181	1,850	134
Loosen nut
2nd		69	700	51
Intermediate shaft x Center support bearing assy No. 2
1st		181	1,850	134
Loosen nut
2nd		69	700	51
Propeller shaft x Intermediate shaft		74	750	54
Rear propeller shaft x Rear differential		74	750	54
Intermediate shaft rear flange x Rear propeller shaft cross groove joint		29	296	21
Center support bearing assy No. 1 x Body		37	375	27
Center support bearing assy No. 2 x Body		37	375	27
Front wheel set nut		103	1,050	76
Lower ball joint x Lower suspension arm		127	1,300	94
Tie rod end x Steering knuckle		49	500	36
Axle hub x Front drive shaft		294	3,000	217
Front disc brake caliper assy x Steering knuckle		107	1,090	79
Front drive shaft center bearing set bolt	2WD	32	330	24
Front speed sensor set bolt		8.0	82	71 in..lbf
Flexible hose and speed sensor wire harness x Shock absorber		19	194	14
Rear wheel set nut		103	1,050	76
Speed sensor x Rear axle carrier	4WD	8.0	82	71
Axle hub x Rear drive shaft	4WD	216	2,200	159
Rear drive shaft x Side gear shaft	4WD	56	571	41
Rear axle carrier sub-assy x Rear disk brake caliper		88	900	65
Front stabilizer Link assy x Shock absorber		74	755	55
Shock absorber x Front axle carrier		210	2,141	155
Front axle carrier x Lower ball joint		123	1,254	91
Rear axle carrier sub-assy x Rear axle hub & bearing		56	571	41
Transfer extension housing x Transfer dynamic damper		26	260	19
Disk brake dust cover front x Steering knuckle		8.3	85	74 in..lbf