Rocker Panel Moulding: Removal

REMOVE FRONT FENDER MOULDING
1. Using a hexagon wrench, remove the 2 screws.
2. Using a moulding remover, pry out the moulding.
3. Remove the moulding.
  
  Fig 1: Removing Front Fender Moulding
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FRONT ROCKER PANEL MOULDING
1. Remove the 6 screws.
2. Using a clip remover, remove the 6 clips.
3. Using a moulding remover, remove the moulding.
  
  Fig 2: Removing Front Rocker Panel Moulding
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE QUARTER OUTSIDE MOULDING
1. Remove the 2 screws.
2. Using a moulding remover, pry out the moulding.
3. Remove the moulding.
  
  Fig 3: Removing Quarter Outside Moulding
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE REAR ROCKER PANEL MOULDING
1. Remove the screw.
2. Using a clip remover, remover the 2 clips.
3. Using a moulding remover, remove the moulding.
  
  Fig 4: Removing Rear Rocker Panel Moulding
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002