FixVault
Home › Lexus › 2005 › GS 430 › Repair and Diagnosis › Body & Frame › Exterior/Interior Trim › Body Outside Moulding › Removal

Body Outside Moulding: Removal

  1. REMOVE FRONT FENDER MOULDING 
    1. Using a hexagon wrench, remove the 2 screws.
    2. Using a moulding remover, pry out the moulding.
    3. Remove the moulding.
    Fig 1: Removing Front Fender Moulding Screws
    G02952821Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE FRONT DOOR OUTSIDE MOULDING 
    1. Remove the 4 bolts.
      Fig 2: Removing Front Door Outside Moulding Bolts
      G02952822Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Using a moulding remover, pry out the moulding.
    3. Pull off the moulding by cutting the adhesive tape with a knife.
    4. Remove the moulding.
    Fig 3: Pulling off Moulding By Cutting Adhesive Tape With Knife
    G02952823Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE REAR DOOR OUTSIDE MOULDING 
    1. Remove the 4 bolts.
      Fig 4: Removing Rear Door Outside Moulding Bolts
      G02952824Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Using a moulding remover, pry out the moulding.
    3. Pull off the moulding by cutting the adhesive tape with a knife.
    4. Remove the moulding.
    Fig 5: Removing Rear Door Outside Moulding Clips
    G02952825Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE QUARTER OUTSIDE MOULDING 
    1. Remove the 2 screws.
    2. Using a moulding remover, pry out the moulding.
    3. Remove the moulding.
    Fig 6: Removing Quarter Outside Moulding Screws
    G02952826Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault