Charging (3UZ-FE): Generator: Replacement

REPLACE FRONT BEARING
1. Remove the 4 screws, bearing retainer and bearing.
2. Using SST and a press, press out the bearing.
  SST 09950-60010 (09951-00260, 09952-06010)
  
  Fig 1: Pressing Out Bearing
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Using SST and a press, press in a new bearing.
  SST 09950-60010 (09951-00520)
  
  Fig 2: Pressing In Bearing
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Install the bearing retainer with the 4 screws.
  Torque: 3.0 N.m (31 kgf.cm, 27 in..lbf)
REPLACE REAR BEARING
1. Using SST, remove the bearing cover (outside) and bearing.
  SST 09820-00021
  
  NOTE: Be careful not to damage the fan.
2. Remove the bearing cover (inside).
  
  Fig 3: Removing Bearing Cover And Bearing
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Place the bearing cover (inside) on the rotor.
4. Using SST and a press, press in a new bearing.
  SST 09820-00031
  
  Fig 4: Pressing In New Bearing
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. Using SST, push in the bearing cover (outside).
  SST 09285-76010
  
  Fig 5: Pushing In Bearing Cover (Outside)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002