How To Proceed With Troubleshooting

HINT:

Troubleshoot in accordance with the procedures on the following references.

1. VEHICLE BROUGHT TO WORKSHOP 
   1. Go to next step.
2. CUSTOMER PROBLEM ANALYSIS CHECK AND PROBLEM SYMPTOM 
   1. Go to next step.
3. SEE  PROBLEM SYMPTOMS TABLE 
   1. When problem is not listed on problem symptoms table, proceed to A.
   2. When problem is listed on problem symptoms table, proceed to B.
   1. B: Go to step   5 . 
   2. A: Go to next step. 
4. PERFORM TROUBLESHOOTING ACCORDING TO MALFUNCTION SYMPTOM 
   1. See PRE-CHECK
      1. Inspection with the hand-held tester (ECU DATA MONITOR).
   2. See TERMINALS OF ECU
   3. See ON-VEHICLE INSPECTION
5. ADJUST, REPAIR OR REPLACE 
   1. Go to next step.
6. CONFIRMATION TEST 
   1. END