Inspection Procedure
- Check the power window master switch circuit using DTC check (See DTC B1211 / 11: POWER WINDOW MASTER SWITCH ECU COMMUNICATION STOP
).
OK: Proceed to next circuit inspection shown on problem symptom table (See PROBLEM SYMPTOMS TABLE ).
NG: Go to next step
- Check the power window master switch (See INSPECTION
).
NG: Replace the power window master switch.
OK: Go to next step
- Check wire harness and connector between power window master switch and body ECU.
NG: Repair or replace wire harness or connector.
OK: Proceed to next circuit inspection shown on problem symptom table (See PROBLEM SYMPTOMS TABLE ).