Front Stabilizer Bar: Inspection

INSPECT STABILIZER BAR LINK BALL JOINT BOOT FOR DAMAGE
INSPECT STABILIZER BAR LINK BALL JOINT FOR ROTATION CONDITION
1. As shown in the illustration, flip the ball joint stud back and forth 5 times before installing the nut.
2. Using a torque wrench, turn the stud continuously 1 turn per 2-4 seconds and take the torque reading on the 5th turn.
  1. Turning torque:
  2. 0.05-1.9 N.m (0.5-20 kgf.cm, 0.4-16 in.lbf)