Solar Sensor: Inspection

Using a screwdriver, pull out the sensor, then disconnect the connector.

HINT:

Tape the screwdriver tip before use.

Fig 1: Removing Solar Sensor

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Cover the sensor with a cloth, check that the no continuity exists between terminals.

   If continuity exists, replace the sensor.

   Fig 2: Covering Sensor With Cloth To Check No Continuity Exists Between Terminals

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the cloth from the sensor and subject the sensor to electric light, check that continuity exists between terminals.

If no continuity exists, replace the sensor.

Fig 3: Subjecting Sensor To Electric Light And Checking Continuity Exists Between Terminals

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Connect the connector and install the solar sensor.

Fig 4: Installing Solar Sensor

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002