Ultrasonic Sensor No. 1: Replacement

HINT:

• See COMPONENTS - FRONT BUMPER , COMPONENTS - REAR BUMPER .
• See LOCATION  .
• Installation is in the reverse order of removal.

1. REMOVE FRONT BUMPER COVER (See step 5 on  REPLACEMENT  ) 
2. REMOVE REAR BUMPER COVER (See step 12 on  REPLACEMENT  ) 
3. REMOVE ULTRASONIC SENSOR RETAINER NO. 1 
   1. Disconnect the connector.
   2. Remove the ultrasonic sensor retainer No. 1 as shown in the illustration.
      Fig 1: Removing Ultrasonic Sensor Retainer No. 1

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. REMOVE ULTRASONIC SENSOR NO. 1 
   1. Remove the ultrasonic sensor No. 1.
      Fig 2: Removing Ultrasonic Sensor No. 1

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002