Lighting System: Inspection

1. Measure the resistance according to the value(s) in FRONT DOOR COURTESY LAMP SWITCH - RESISTANCE TABLE  .

1. Measure the resistance according to the value(s) in REAR DOOR COURTESY LAMP SWITCH - RESISTANCE TABLE  .

1. Inspect luggage room door courtesy switch continuity.
   1. Measure the resistance according to the value(s) in LUGGAGE DOOR CLOSER ASSY - RESISTANCE TABLE  .

Standard: 

Fig 1: Inspecting Luggage Door Closer Assy

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Inspect key cylinder light operation.

1. Connect the (+) lead from the battery to terminal 2 and the (-) lead to terminal 6, and check that the light comes on.

OK: Comes on. 

Fig 2: Inspecting Transponder Key Amplifier

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Inspect map lamp assy in the overhead J/B.

1. Connect the (+) lead from the battery to terminal 17 and the (-) lead to terminal 5, and check that the map lamp comes on when the map lamp switch is in the ON position.

OK: Comes on. 

Fig 3: Inspecting Map Lamp Assy

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Inspect room lamp assy in the overhead J/B.
   1. Connect the (+) lead from the battery to terminal 17 and the (-) lead to terminal 5, and check that the room lamp comes on when the room lamp switch is in the ON position.

      OK: Comes on. 

   2. Connect the (+) lead from the battery to terminal 6 and the (-) lead to terminal 5, and check that the room lamp comes on when the room lamp switch is in the DOOR position.

   OK: Comes on. 

2. Inspect center console illumination in the overhead J/B.

1. Connect the (+) lead from the battery to terminal 13 and the (-) lead to terminal 4, and check that the center console illumination comes on.

OK: Comes on. 

Fig 4: Inspecting Lamp Assy No. 1

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Connect the (+) lead from the battery to terminal 3 and the (-) lead to terminal 2, and check that the rear room ramp comes on when the switch is in the ON position.

   OK: Comes on. 

2. Connect the (+) lead from the battery to terminal 3 and the (-) lead to terminal 1, and check that the rear room ramp comes on when the switch is in the DOOR position.

OK: Comes on. 

Fig 5: Identifying Room Lamp Assy LH

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Connect the (+) lead from the battery to terminal 1 and the (-) lead to terminal 2, and check that the rear room ramp comes on when the switch is in the ON position.

   OK: Comes on. 

2. Connect the (+) lead from the battery to terminal 1 and the (-) lead to terminal 3, and check that the rear room ramp comes on when the switch is in the DOOR position.

OK: Comes on. 

Fig 6: Identifying Rear Room Lamp Assy RH

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Connect the (+) lead from the battery to terminal 1 and the (-) lead to terminal 2, and check that the vanity light comes on when the visor is opened.

OK: Comes on. 

Fig 7: Identifying Visor Assy

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Connect the (+) lead from the battery to terminal 2 and the (-) lead to terminal 1, and check that the rear vanity light comes on when the cover is opened.

OK: Comes on. 

Fig 8: Identifying Vanity Lamp Assy

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Inspect the front step lamp illumination.

1. Connect the (+) lead from the battery to the terminal 1 and the (-) lead to terminal 2, then check that the illumination comes on.

OK: Comes on. 

Fig 9: Inspecting Front Step Lamp Illumination

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Inspect the rear step lamp illumination.

1. Connect the (+) lead from the battery to terminal 2 and the (-) lead to terminal 1, then check that the illumination comes on.

OK: Comes on. 

Fig 10: Inspecting Rear Step Lamp Illumination

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Inspect the luggage room compartment lamp.

1. Connect the (+) lead from the battery to terminal 2 and the (-) lead to terminal 1, then check that the luggage room compartment lamp comes on.

OK: Comes on. 

Fig 11: Inspecting Luggage Room Compartment Lamp

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Inspect the front LH buckle illumination.

1. Connect 3 dry cell batteries (1.5 V) in a series.
2. Connect the (+) lead from the dry cell batteries to terminal 3 and the (-) lead to terminal 5, then check that the illumination comes on.

OK: Comes on. 

Fig 12: Inspecting Front LH Buckle Illumination

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Inspect the front RH buckle illumination.

1. Connect 3 dry cell batteries (1.5 V) in a series.
2. Connect the (+) lead from the dry cell batteries to terminal 3 and the (-) lead to terminal 6, then check that the illumination comes on.

OK: Comes on. 

Fig 13: Inspecting Front RH Buckle Illumination

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Inspect the inside handle illumination.

1. Connect the (+) lead from the battery to terminal 1 and the (-) lead to terminal 2, then check that the illumination comes on.

OK: Comes on. 

Fig 14: Inspecting Inside Handle Illumination

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Inspect the courtesy lamp.

1. Connect the (+) lead from the battery to terminal 2 and the (-) lead to terminal 1, then check that the courtesy lamp comes on.

OK: Comes on. 

Fig 15: Inspecting Courtesy Lamp

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Measure the resistance according to the value(s) in HAZARD WARNING SIGNAL SWITCH - RESISTANCE TABLE  .

Fig 16: Identifying Hazard Warning Signal Switch Assy

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Inspect stop lamp switch assy.

1. Measure the resistance according to the value(s) in STOP LAMP SWITCH - RESISTANCE TABLE  .

Standard: 

Fig 17: Inspecting Stop Lamp Switch Assy

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Measure the resistance according to the value(s) in HEADLAMP SWIVEL MAIN SWITCH - RESISTANCE TABLE  .

Standard: 

Fig 18: Identifying Headlamp Swivel Main Switch

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002