FixVault

Key Reminder Warning System - Diagnostics: Inspection

  1. INSPECT UNLOCK WARNING SWITCH ASSY 
    1. Remove the unlock warning switch.
    2. Measure the resistance of the switch.

    Standard: 

    SPECIFIED CONDITION

    Tester Connection Switch Condition Specified Condition
    1 -2 Not pushed 10 kΩ or higher
    1 -2 Pushed Below 1 Ω

    If the result is not as specified, replace the switch assy.

    Fig 1: Identifying Terminals Of Unlock Warning Switch Assy
    G03003044Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSPECT FRONT DOOR COURTESY LAMP SWITCH ASSY (DRIVER SIDE) 
    1. Remove the courtesy lamp switch.
    2. Measure the resistance of the switch.

    Standard: 

    Fig 2: Identifying Terminals Of Front Door Courtesy Lamp Switch (Driver Side)
    G03003045Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    SPECIFIED CONDITION

    Tester Connection Switch Condition Specified Condition
    1 - Body ground Not pushed (ON) Below 1 Ω
    1 - Body ground Pushed (OFF) 10 kΩ or higher

    If the result is not as specified, replace the switch assy.