Hood Support: Replacement

HINT:

• Use the same procedures for the RH side and LH side.
• The procedures listed below are for the LH side.
• A bolt without a torque specification is a standard bolt (see STANDARD BOLT ).

1. REMOVE HOOD SUPPORT ASSY LH 
   1. Remove the 2 bolts and hood support.

   HINT:

   Remove the hood support while supporting the hood panel with your hands.

   Fig 1: Removing Hood Support While Supporting Hood Panel

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. INSTALL HOOD SUPPORT ASSY LH 
   1. Install the hood support with the 2 bolts.
      1. Torque: 22 N.m (225 kgf.cm, 19 ft.lbf)