FixVault
Home › Lexus › 2005 › LS 430 › Repair and Diagnosis › Restraints › Passive Restraints › Power Shoulder Belt Anchorage System - Diagnostics › Data List/Active Test

Data List/Active Test

  1. DATA LIST 

    HINT:

    Using the hand-held tester's DATA LIST allows switch, sensor, actuator and other item values to be read without removing any parts. Reading the DATA LIST early in troubleshooting is one way to save time.

    1. Connect the hand-held tester (with CAN VIM) to the DLC3.
    2. Turn the ignition switch ON.
    3. Read the DATA LIST on the tester's screen.

    Driver side J/B ECU: 

    DRIVER SIDE J/B ECU - DATA LIST TABLE

    Item Measurement Item/Display (Range) Normal Condition Diagnostic Note
    SLDR BELT POS 1 Shoulder belt position 1/ Min: 0, Max: 255 Ignition switch: ON -
    SLDR BELT POS 2 Shoulder belt position 2/ Min: 0, Max: 255 Ignition switch: ON -
    SLDR BELT POS 3 Shoulder belt position 3/ Min: 0, Max: 255 Ignition switch: ON -
  2. ACTIVE TEST 

    HINT:

    Performing the hand-held tester's ACTIVE TEST allows relay, VSV, actuator and other items to be operated without removing any parts. Performing the ACTIVE TEST early in troubleshooting is one way to save time.

    The DATA LIST can be displayed during the ACTIVE TEST.

    1. Connect the hand-held tester (with CAN VIM) to the DLC3.
    2. Turn the ignition switch ON.
    3. Perform the ACTIVE TEST according to the display on the tester.

    Driver side J/B ECU: 

    DRIVER SIDE J/B ECU - ACTIVE TEST TABLE

    Item Test Details Diagnostic Note
    SHOULDER BELT Driver side shoulder belt UP/DOWN -
About FixVault