Rocker Panel Moulding: Removal

w/ Except Full Cover Type:
REMOVE SIDE STEP ASSEMBLY
1. Remove the 8 bolts and the side step assembly.
  Torque: 5.0 N.m (51 kgf.cm, 44 in.lbf)
2. Use the same manner described above to the other side.
Fig 1: Removing Side Step Assembly (W/ Except Full Cover Type)
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
w/ Running Board Lights Type:
REMOVE RUNNING BOARD LIGHTS ASSEMBLY
1. Remove the 8 bolts, and disconnect the connector and the running board lights assembly.
  Torque: 5.0 N.m (51 kgf.cm, 44 in.lbf)
2. Use the same manner described above to the other side.
Fig 2: Removing Running Board Lights Assembly (W/ Running Board Lights Type)
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE ROCKER PANEL MOULDING
1. Remove the 10 screws.
2. Using a screwdriver, remove the rocker panel moulding.
  HINT:
  
  Tape up the screwdriver tip before use.
3. Use the same manner described above to the other side.
Fig 3: Removing Rocker Panel Moulding
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002