Blower Unit: Disassembly

Remove the 3 screws and the air inlet servomotor.

Fig 1: Removing Air Inlet Servomotor

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Disconnect the connector.
2. Remove the screw and the blower motor control relay.

Fig 2: Removing Blower Motor Control Relay

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Disconnect the connector.
2. Remove the 3 screws and the blower motor.

Fig 3: Removing Blower Motor

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Remove the screw and the wire harness.