Circuit Description

When the cruise control main switch is ON, CRUISE main indicator light and READY indicator light comes on.

This indicates the control condition (the front vehicle, vehicle-to-vehicle distance, and set vehicle speed) and fail-safe state through the multiplex communication system.

The master warning light, CRUISE main indicator light come on and vehicle-to-vehicle distance information is displayed on the combination meter as the alarm buzzer sounds.

HINT:

If the front vehicle in the same lane significantly decreases vehicle speed or another vehicle cuts in front of your vehicle, adequate deceleration cannot be applied and the vehicle-to-vehicle distance will shorten. At this time, the system sounds the buzzer and the master warning light blinks to warn the driver.