FixVault
Home › Lexus › 2005 › RX 330 AWD › Repair and Diagnosis › External Pages › Different car › Section 565 (Navigation) › Navigation Ecu › Removal

Navigation Ecu: Removal

WARNING: This page is about a different car, the 2007 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. REMOVE DECK BOARD SUB-ASSEMBLY  (See REMOVAL )
  3. REMOVE TONNEAU COVER ASSEMBLY 
  4. REMOVE JACK CARRIER SUPPORT 
  5. REMOVE JACK ASSEMBLY 
  6. REMOVE JACK CARRIER ASSEMBLY 
  7. REMOVE DECK FLOOR BOX FRONT  (See REMOVAL )
  8. REMOVE DECK FLOOR BOX REAR  (See REMOVAL )
  9. REMOVE DECK NO. 2 BOARD SUB-ASSEMBLY  (See REMOVAL )
  10. REMOVE DECK NO. 3 BOARD SUB-ASSEMBLY  (See REMOVAL )
  11. REMOVE REAR FLOOR FINISH PLATE  (See REMOVAL )
  12. REMOVE DECK SIDE TRIM BOX LH  (See REMOVAL )
  13. REMOVE DECK SIDE TRIM BOX RH  (See REMOVAL )
  14. REMOVE NAVIGATION ECU 
    1. Disconnect each connector.
    2. Remove the 3 nuts and the navigation ECU.
      Fig 1: Identifying Navigation ECU With Nuts
      G05271017Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  15. REMOVE NO. 2 DISC PLAYER BRACKET 
    1. Remove the 2 screws and the No. 2 disc player bracket.
      Fig 2: Identifying No. 2 Disc Player Bracket With Screws
      G05271018Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  16. REMOVE DISC PLAYER BRACKET 
    1. Remove the 2 screws and the disc player bracket.
      Fig 3: Identifying Disc Player Bracket With Screws
      G05271019Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault