Inspection Procedure

HINT:

After the inspection is completed, clear the DTCs.

1. CHECK THAT DISC IS INSERTED PROPERLY 
   1. Check whether or not the disc is inserted upside down.

      OK: 

      Disc is properly inserted. 

   NG: INSPECT DISC 

   OK: Go to Next Step 

2. CHECK DISC 
   1. Check that the disc is not deformed or cracked.
      Fig 1: Checking If Disc Is Deformed Or Cracked

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      OK: 

      No deformation or cracks on the disc. 

   NG: CHANGE DISC 

   OK: Go to Next Step 

3. DISC CLEANING 
   1. Disc cleaning
      Fig 2: Cleaning Disc Surface With Soft Dry Cloth

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.
         NOTE: Do not use a conventional record cleaner or antistatic preservative.
4. CLEAR DTC 
   1. Clear the DTCs (See DTC CHECK/CLEAR  ).
5. RECHECK DTC 
   1. Recheck for DTCs and check if the same trouble occurs again.

      OK: 

      Malfunction disappears. 

   OK: END 

   NG: Go to Next Step 

6. REPLACE DISC WITH ANOTHER AND RECHECK 
   1. Replace the disc with another and recheck.
      1. Replace the disc with another normal one.
      2. Clear the DTCs (See DTC CHECK/CLEAR  ).
      3. Recheck for DTCs and check if the same trouble occurs again.

         OK: 

         Malfunction disappears. 

   NG: REPLACE TELEVISION DISPLAY ASSEMBLY 

   OK: END