Hood Support: Replacement

HINT:

• Use the same procedures for the RH side and LH side.
• The procedures listed below are for the LH side.
• A bolt without a torque specification is shown in the standard bolt table (see SPECIFIED TORQUE FOR STANDARD BOLTS ).

1. REMOVE HOOD SUPPORT ASSY LH 
   1. Remove the bolt and hood support from the hood panel.

      HINT:

      While supporting the hood by hand, remove the hood support.

   2. Remove the bolt and hood support from the body.
      Fig 1: Removing Bolt & Hood Support

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. INSTALL HOOD SUPPORT ASSY LH 
   1. Install the hood support with the 2 bolts.

      Torque: 22 N.m (224 kgf.cm, 16 ft.lbf)