FixVault
Home › Lexus › 2006 › GS 300 AWD › Repair and Diagnosis › External Pages › Different car › Section 18 (Automatic Transmission) › Speed Sensor › Installation

Speed Sensor: Installation

WARNING: This page is about a different car, the 2006 Lexus GS 430. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL TRANSMISSION REVOLUTION SENSOR 
    1. Install the transmission revolution sensor (SP2 sensor).
      1. Coat a new O-ring with ATF and install it to the transmission revolution sensor.
      2. Install the transmission revolution sensor with the bolt.

        Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

      3. Connect the transmission revolution sensor connector.
        Fig 1: Identifying O-Ring Into Transmission Revolution Sensor (SP2 Sensor)
        G04028372Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the transmission revolution sensor (NT sensor).
      1. Coat a new O-ring with ATF and install it to the transmission revolution sensor.
      2. Install the transmission revolution sensor with the bolt.

        Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

      3. Connect the transmission revolution sensor connector.
        Fig 2: Identifying O-Ring Into Transmission Revolution Sensor (NT Sensor)
        G04028373Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault