Meter / Gauge System: Precaution
NOTE:
When disconnecting the cable from the negative (-) battery terminal, initialize the following systems after the cable is reconnected.
SYSTEM NAME DESCRIPTION
| System Name | See procedure |
|---|---|
| Clearance Sonar System | INITIALIZATION |
| Power Window Control System | INITIALIZATION |
| Sliding Roof System | INITIALIZATION |
| Variable Gear Ratio Steering System | INITIALIZATION |
- REMOVAL AND INSTALLATION OF BATTERY TERMINAL
- Before performing electronic work, disconnect the battery cable in order to prevent it from shorting and burning out.
- When disconnecting and reconnecting the battery cable, turn the engine switch and combination switch off and loosen the terminal nut completely. Perform operations without twisting or prying on the terminal.
- When the battery cable is removed, the memories of the clock, radio, DTCs, etc. are erased. So before removing it, check and make a note of them.