FixVault
Home › Lexus › 2006 › GX 470 › Repair and Diagnosis › Engine Performance › System › Engine Control System - Service Information › Accelerator Pedal Rod ASSY (2UZ-FE) › Replacement

Accelerator Pedal Rod ASSY (2UZ-FE): Replacement

  1. REMOVE ACCELERATOR PEDAL ROD ASSY 
    1. Disconnect the accelerator pedal connector.
    2. Remove the 2 nuts and the accelerator pedal assy.
      Fig 1: Removing Accelerator Pedal Rod Assy
      G02967458Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL ACCELERATOR PEDAL ROD ASSY 
    NOTE:
    • Avoid physical shock to the accelerator pedal assy. 
    • Do not disassemble the accelerator pedal assy. 
    1. Install the accelerator pedal assy with the 2 nuts.

      Torque: 5.0 N.m (51 kgf.cm, 44 in.lbf) 

    2. Connect the accelerator pedal connector.
About FixVault