FixVault
Home › Lexus › 2006 › GX 470 › Repair and Diagnosis › External Pages › Different car › Section 102 (Suspension Control) › Height Control Compressor › Inspection

Height Control Compressor: Inspection

WARNING: This page is about a different car, the 2007 Lexus GX 470. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT HEIGHT CONTROL COMPRESSOR ASSEMBLY 
    1. Disconnect the height control compressor assembly connector.
      2. Fig 1: Identifying Height Control Compressor Connector Terminals
      G05262358Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Apply battery voltage between terminal 1 and 2 of the height control compressor assembly.

      Standard: 

      Compressor motor operates. 

      NOTE:
      • Do not operate the height control compressor assembly 90 sec. or more.
      • Since short and lock inside the height control compressor assembly causes enormous current to flow, stop the operation immediately when it does not rotate.
About FixVault