FixVault
Home › Lexus › 2006 › GX 470 › Repair and Diagnosis › External Pages › Different car › Section 114 (Navigation) › Navigation System › BLUETOOTH Tel Check Mode

BLUETOOTH Tel Check Mode

WARNING: This page is about a different car, the 2007 Lexus GX 470. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

Illustrations may differ from the actual vehicle depending on the device settings and options. Therefore, some detailed area may not be shown the same as on the actual vehicle.

  1. ENTER DIAGNOSTIC MODE (See  DTC CHECK/CLEAR   ) 
  2. "BLUETOOTH" TEL CHECK 
    1. Select ""Bluetooth" TEL Check" from the "Diagnosis MENU" screen.
      Fig 1: Identifying Tester Display - Diagnosis MENU
      G04948861Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. "BLUETOOTH" CHECK 
    1. Select "Bluetooth Check" from the "Bluetooth Handsfree Check Menu" screen.
      Fig 2: Identifying Tester Display - Handsfree Check Menu
      G04948862Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Select "Serial Communication Log" from the "Bluetooth Check Menu" screen.
      Fig 3: Identifying Tester Display - Serial Communication Log (1 Of 2)
      G04948863Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. The communication log data in the multi-display are displayed on this screen.
        Fig 4: Identifying Tester Display - Serial Communication Log (2 Of 2)
        G04948864Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

        HINT:

        The displayed data can be used as a reference.

    3. Select "Software Version" from the ""Bluetooth" Check Menu" screen.
      Fig 5: Identifying Tester Display - Software Version
      G04948865Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Check the software version of the "Bluetooth" module.
      Fig 6: Identifying Tester Display - Bluetooth
      G04948866Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

    Screen description: 

    DISPLAY TABLE

    Display Contents
    General Version/*1
    • Overall software version of "Bluetooth" module
    • If any of the API version, upper stack version, and low stack version is updated, the general version is upgraded.
    API Version/*2 API software version is displayed.
    Upper Stack Version/*3 Upper Stack version is displayed.
    Lower Stack Version/*4 Lower Stack version is displayed.

    HINT:

    This function is controlled by the multi-display.

  4. HANDSFREE VOICE QUALITY SET 
    Fig 7: Identifying Tester Display - Handsfree Voice Quality Set
    G04948867Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Select "Handsfree Voice Quality Set" from the ""Bluetooth" Handsfree Check Menu" screen.
    2. Check the handsfree voice level.
      Fig 8: Identifying Tester Display - Handsfree Voice Level
      G04948868Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

    Screen description: 

    HANDSFREE VOICE QUALITY SET

    Display Contents
    Received voice level adjustment/*1 Setting possible for the voice level received from "Bluetooth" compatible phones.
    Sent voice level adjustments Setting possible for the voice sent to "Bluetooth" compatible phones.

    HINT:

    This function is controlled by the multi-display.

    NOTE: "Voice Quality Type" should not be changed.
About FixVault