FixVault
Home › Lexus › 2006 › GX 470 › Repair and Diagnosis › External Pages › Different car › Section 114 (Navigation) › Navigation System › No Image Appears on Multi-display › Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2007 Lexus GX 470. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DISPLAY SETTING 
    1. Check that the display is not in "Screen OFF" mode.

      OK: The display setting is not in "screen OFF" mode. 

      NG: CHANGE SCREEN TO "SCREEN ON" MODE 

      OK: Go to Next Step 

  2. CHECK IMAGE QUALITY SETTING 
    1. Check that the screen color quality can be set.

      OK: Setting is possible. 

      OK: PRESS PANEL SWITCH "DISPLAY" AND SET SCREEN COLOR QUALITY TO NORMAL 

      NG: Go to Next Step 

  3. CHECK CABIN 
    1. Check that condensation is not likely to occur in the cabin, and that the temperature is not high or extremely low in the cabin.

      HINT:

      • A humid cabin and a rapid change in temperature may lead to condensation. Condensation in the cabin may short circuit the screen.
      • The appropriate cabin temperature is 20 to 30°C (68 to 86°F).

        OK: Condensation is not likely and temperature is not high or extremely low. 

        NG: SET CABIN TO APPROPRIATE TEMPERATURE 

        OK: PROCEED TO NEXT INSPECTION PROCEDURE SHOWN IN  PROBLEM SYMPTOMS TABLE  

About FixVault