FixVault

Microphone Amplifier: Installation

WARNING: This page is about a different car, the 2006 Lexus GS 430 and 2006 Lexus GS 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL MICROPHONE AMPLIFIER ASSEMBLY 
    1. Install the microphone amplifier to the map light.
    2. Install the cover to the map light with the 9 screws labeled A.
    3. Connect the connector labeled B.
    4. Install the microphone amplifier cord to the cover labeled C.
  2. INSTALL PERSONAL LIGHT ASSEMBLY (See  INSTALLATION  ) 
  3. INSTALL FRONT ROOF TOP GARNISH (See  INSTALLATION  ) 
  4. INSTALL INNER REAR VIEW MIRROR COVER 
  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  6. PERFORM INITIALIZATION 
    1. Perform initialization (See INITIALIZATION ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
      Fig 1: Identifying Microphone Amplifier Assembly
      G04022282Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002