Navigation Ecu: Removal
WARNING: This page is about a different car, the 2006 Lexus GS 430 and 2006 Lexus GS 300. However, it is still accessible from the selected car via links, so may be relevant.
- DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
- REMOVE FRONT CONSOLE UPPER PANEL GARNISH (See REMOVAL )
- REMOVE CONSOLE UPPER PANEL ASSEMBLY (See REMOVAL )
- REMOVE INSTRUMENT PANEL FINISH PANEL END RH (See REMOVAL )
- REMOVE FRONT DOOR SCUFF PLATE RH (See REMOVAL )
- REMOVE FRONT DOOR OPENING TRIM COVER RH (See REMOVAL )
- REMOVE INSTRUMENT SIDE PANEL RH (See REMOVAL )
- REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (See REMOVAL )
- REMOVE FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY (See REMOVAL )
- REMOVE GLOVE COMPARTMENT DOOR SUBASSEMBLY (See REMOVAL )
- REMOVE NAVIGATION ECU WITH DISC PLAYER BRACKET
- Disconnect the connectors.
- Remove the 3 bolts and navigation ECU.
- REMOVE NO. 2 DISC PLAYER BRACKET
- Remove the 2 screws and bracket.
- REMOVE NO. 1 DISC PLAYER BRACKET
- Remove the 2 screws and bracket.
- REMOVE NAVIGATION ECU