FixVault
Home › Lexus › 2006 › GX 470 › Repair and Diagnosis › External Pages › Different car › Section 50 (Cruise Control) › Cruise Control Main Switch › Removal

Cruise Control Main Switch: Removal

WARNING: This page is about a different car, the 2006 Lexus GS 430 and 2006 Lexus GS 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  2. REMOVE STEERING WHEEL NO. 2 COVER LOWER (See  REMOVAL  ) 
  3. REMOVE STEERING WHEEL NO. 3 COVER LOWER (See  REMOVAL  ) 
  4. REMOVE STEERING WHEEL PAD (See  REMOVAL  ) 
  5. REMOVE STEERING WHEEL ASSEMBLY 

    For 3GR-FSE (see REMOVAL )

    For 3UZ-FE (see REMOVAL )

  6. REMOVE CRUISE CONTROL MAIN SWITCH 
    1. Disconnect the connector.
    2. Remove the 2 screws and switch.
      Fig 1: Identifying Cruise Control Main Switch
      G04024109Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault