FixVault
Home › Lexus › 2006 › GX 470 › Repair and Diagnosis › External Pages › Different car › Section 50 (Cruise Control) › Cruise Control System › Terminals Of Ecu

Terminals Of Ecu

WARNING: This page is about a different car, the 2006 Lexus GS 430 and 2006 Lexus GS 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK ECM 
    Fig 1: Identifying ECM Connector Terminals
    G04023999Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    SYMBOLS AND SPECIFIED CONDITION CHART

    Symbols (Terminals No.) Wiring Color Terminal Description Condition Specified Condition
    A7-3 (TC) - E7-7 (E1) V - BR Ground Engine switch on (IG) 10 to 14 V
    A7-3 (TC) - E7-7 (E1) V - BR Ground Connect terminals TC and CG of DLC3 Below 1 V
    A7-4 (STP) - E7-7 (E1) R-B - BR Stop light signal Engine switch on (IG), Depress brake pedal 10 to 14 V
    A7-4 (STP) - E7-7 (E1) R-B - BR Stop light signal Engine switch on (IG), Release brake pedal Below 1 V
    A7-31 (CCS) - E7-7 (E1) L-B - BR Cruise control main switch circuit Engine switch on (IG) 10 to 14 V
    A7-31 (CCS) - E7-7 (E1) L-B - BR Cruise control main switch circuit CANCEL switch ON 6.6 to 10.1 V
    A7-31 (CCS) - E1 (E22-7) L-B - BR Cruise control main switch circuit SET/COAST switch ON 4.5 to 7.1 V
    A7-31 (CCS) - E7-7 (E1) L-B - BR Cruise control main switch circuit RES/ACC switch ON 2.3 to 4.0 V
    A7-31 (CCS) - E7-7 (E1) L-B - BR Cruise control main switch circuit MAIN switch ON Below 1 V
    A6-8 (ST1) - E7-7 (E1) G-W - BR Stop light signal Engine switch on (IG), Depress brake pedal Below 1 V
    A6-8 (ST1) - E7-7 (E1) G-W - BR Stop light signal Release brake pedal 10 to 14 V
About FixVault