FixVault
Home › Lexus › 2006 › GX 470 › Repair and Diagnosis › External Pages › Different car › Section 50 (Cruise Control) › Distance Control Ecu › Removal

Distance Control Ecu: Removal

WARNING: This page is about a different car, the 2006 Lexus GS 430 and 2006 Lexus GS 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  2. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (See  REMOVAL  ) 
  3. REMOVE DISTANCE CONTROL ECU ASSEMBLY 
    Fig 1: Identifying Distance Control ECU Assembly
    G04024112Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Disconnect the connector.
    2. Remove the nut and distance control ECU.
About FixVault