FixVault
Home › Lexus › 2006 › GX 470 › Repair and Diagnosis › External Pages › Different car › Section 84 (Automatic Transaxle) › Shift Lever Assembly › Removal

Shift Lever Assembly: Removal

WARNING: This page is about a different car, the 2007 Lexus GX 470. However, it is still accessible from the selected car via links, so may be relevant.
  1. SEPARATE BATTERY NEGATIVE TERMINAL 
  2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY 
    Fig 1: Identifying Shift Lever Knob Sub-Assembly
    G05261343Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Remove the shift lever knob sub-assembly.
  3. REMOVE FLOOR SHIFT LEVER KNOB SUB-ASSEMBLY 
    Fig 2: Identifying Floor Shift Lever Knob Sub-Assembly
    G05261344Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Remove the floor shift lever knob sub-assembly.
  4. REMOVE NO. 1 CONSOLE UPPER PANEL GARNISH (See  REMOVAL  ) 
  5. REMOVE NO. 2 CONSOLE UPPER PANEL GARNISH (See  REMOVAL  ) 
  6. REMOVE UPPER CONSOLE PANEL ASSEMBLY (See  REMOVAL  ) 
  7. SEPARATE TRANSMISSION CONTROL CABLE ASSEMBLY 
    Fig 3: Identifying Shift Lever Assembly
    G05261345Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Remove the clip and separate the transmission control cable assembly from the shift lever assembly.

      HINT:

      When the transmission control cable end is pressed, it can be removed from the floor shift lever.

      NOTE: The nut may be loosened (up to approx. 1 mm), however, never remove it.
  8. REMOVE FLOOR SHIFT ASSEMBLY 
    Fig 4: Identifying Transmission Floor Shift Assembly Bolts
    G05261346Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Disconnect the connector.
    2. Remove the 4 bolts.
    3. Remove the transmission floor shift assembly.
About FixVault