FixVault
Home › Lexus › 2006 › GX 470 › Repair and Diagnosis › External Pages › Different car › Section 84 (Automatic Transaxle) › Transmission Control Cable › Removal

Transmission Control Cable: Removal

WARNING: This page is about a different car, the 2007 Lexus GX 470. However, it is still accessible from the selected car via links, so may be relevant.
  1. SEPARATE BATTERY NEGATIVE TERMINAL 
  2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY 
  3. REMOVE FLOOR SHIFT LEVER KNOB SUB-ASSEMBLY 
  4. REMOVE NO. 1 CONSOLE UPPER PANEL GARNISH (See  REMOVAL  ) 
  5. REMOVE NO. 2 CONSOLE UPPER PANEL GARNISH (See  REMOVAL  ) 
  6. REMOVE UPPER CONSOLE PANEL ASSEMBLY (See  REMOVAL  ) 
  7. SEPARATE TRANSMISSION CONTROL CABLE ASSEMBLY 
    Fig 1: Identifying Nut & Clip
    G05261372Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Remove the nut and clip, separate the transmission control cable assembly from the transmission control cable bracket.
      2. Fig 2: Identifying Shift Lever Assembly
      G05261345Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove clip, separate the transmission control cable assembly from the floor shift lever assembly.

      HINT:

      When the transmission control cable end is pressed, it can be removed from the floor shift lever.

      NOTE: The nut may be loosened (up to approx. 1 mm), however, never remove it.
  8. REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY 
    1. Remove the 4 nuts and pull out the transmission control cable assembly.
About FixVault