Transfer Assembly: Installation

WARNING: This page is about a different car, the 2007 Lexus GX 470. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL TRANSFER ASSEMBLY

Fig 1: Identifying Transfer Assembly Clamp & Bolts
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Install the transfer to the automatic transmission.
2. Install the 1 clamp and 8 bolts.
  Torque: 24 N*m (245 kgf*cm, 18 ft.*lbf)
INSTALL AUTOMATIC TRANSMISSION ASSEMBLY
HINT:

(See INSTALLATION )
INSTALL TRANSFER CASE LOWER PROTECTOR

Fig 2: Identifying Transfer Case Lower Protector Bolts
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Install the transfer case lower protector with the 4 bolts.
  Torque: 18 N*m (184 kgf*cm, 13 ft.*lbf)
ADD TRANSFER OIL
ADD AUTOMATIC TRANSMISSION FLUID (See AUTOMATIC TRANSMISSION FLUID )
INSPECT AUTOMATIC TRANSMISSION FLUID (See AUTOMATIC TRANSMISSION FLUID )
INSPECT SHIFT LEVER POSITION (See INSTALLATION )
CHECK FOR EXHAUST GAS LEAKAGE
WARM UP
DRIVE TEST