FixVault
Home › Lexus › 2006 › GX 470 › Repair and Diagnosis › External Pages › Different car › Section 95 (Lighting) › Back-Up Light Assembly › Installation

Back-Up Light Assembly: Installation

WARNING: This page is about a different car, the 2007 Lexus GX 470. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL BACK-UP LIGHT ASSEMBLY 
    Fig 1: Identifying Back-Up Light Assembly Claws
    G05265811Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Connect each connector.
    2. Install the back-up light assembly.
  2. INSTALL BACK DOOR OUTSIDE GARNISH 
  3. INSTALL LICENSE REAR LIGHT COVER 
  4. INSTALL BACK DOOR SERVICE HOLE COVER 
  5. INSTALL BACK DOOR TRIM BOARD 
  6. INSTALL DOOR PULL HANDLE SUB-ASSEMBLY 
  7. INSTALL TOOL BOX PANEL SUB-ASSEMBLY UPPER 
  8. INSTALL BACK DOOR SIDE GARNISH LH 
  9. INSTALL BACK DOOR SIDE GARNISH RH 
  10. INSTALL BACK DOOR GARNISH CENTER 
About FixVault