Console Box Light: Inspection

1. INSPECT CONSOLE BOX LIGHT 
   1. Remove the console box light.
   2. Measure the voltage of the connector.

   Standard voltage 

   SPECIFIED CONDITION AND TESTER CONNECTION
   
   

   Tester Connection	Condition	Specified Condition
   J46-2 - J46-1	Clove box is opened	10 to 14 V
   J46-2 - J46-1	Glove box is closed	Below 1 V

   Fig 1: Identifying Console Box Light Connector Terminal

   Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

   If the result is not as specified, repair or replace wire harness or connector.

2. Connect the (+) lead from the battery to terminal 2 and the (-) lead to terminal 1.
3. Check that the console box light comes on.

OK: 

Comes on 

If the result is not as specified, replace the console box light.

Fig 2: Connecting (+) Lead From Battery To Terminal 2 And (-) Lead To Terminal 1

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.