FixVault

System Description

  1. THEFT DETERRENT SYSTEM 

    The theft deterrent system will operate when somebody attempts to forcibly enter the vehicle, unlock any door or luggage compartment door or open the engine hood or the luggage compartment door without using the key. This system causes the interior light to light up, hazard warning lights, headlights and taillights to blink and the vehicle horn and security horn to sound in order to deter break-in and theft.

    • The security indicator comes on or blinks to inform the driver that the alarm is set or not set.
    • The system locks all doors if any door is unlocked during the time that the alarm is activated.
    • The main body ECU RH controls this system.
  2. FUNCTION OF MAIN COMPONENT 
    FUNCTION COMPONENT TABLE

    Component Function
    Security indicator Informs driver of theft deterrent system status.
    Security horn Sounds when attempted brake-in or theft is detected.
    Headlights Blink when attempted break-in or theft is detected.
    Taillights Blink when attempted break-in or theft is detected.
    Hazard warning lights Blinking when attempted break-in or theft is detected.
    Interior light Lights up when attempted break-in or theft is detected.
    Vehicle horns Sounds when attempted break-in or theft is detected.
    Door courtesy light switch Detects door status (open or closed).
    Door lock position switch Detects door status (locked or unlocked).
    Engine hood courtesy switch Detects engine hood status (open or closed).
    Luggage compartment door courtesy switch Detects luggage compartment door status (open or closed).
    Power source ECU Detects engine switch states (off or on (IG)).
  3. SYSTEM FUNCTION 
    1. Disarmed state:
      • The alarm function is not operating.
      • The theft deterrent system is not operating.
    2. Arming preparation state:
      • The time until the system goes into the armed state.
      • The theft deterrent system is not operating.
    3. Armed state:
      • The theft deterrent system is operating.
    4. Alarm sounding state:
      • The alarm function is operating.

      Alarm time: 

      Approx. 60 sec.