FixVault
Home › Lexus › 2006 › IS 250 RWD, Standard › Repair and Diagnosis › Engine Performance › System › Engine Control System (4GR-FSE) - System And Circuit Testing, On-Vehicle Inspection, Removal, Inspection And Installation › Accelerator Pedal › Removal

Accelerator Pedal: Removal

  1. REMOVE ACCELERATOR PEDAL 
    1. Disconnect the accelerator pedal position sensor connector.
    2. Remove the 2 bolts and accelerator pedal.
    NOTE:
    • Avoid physical shock to the accelerator pedal.
    • Do not disassemble the accelerator pedal assembly.
    Fig 1: Identifying Accelerator Pedal Bolts
    G04043969Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault