Entry Lock And Unlock Switch: Inspection

INSPECT ENTRY LOCK AND UNLOCK SWITCH

Remove the outside handle.
Disconnect the connectors.
Measure the resistance according to the value(s) in the table below.

Standard resistance

STANDARD RESISTANCE SPECIFICATION

Tester Connection (Symbols)	Condition	Specified Condition
e1-1 (TRG-)- e1-3 (TRG+)	Lock switch not pushed	10 kΩ or higher
e1-1 (TRG-)- e1-3 (TRG+)	Lock switch pushed	Below 1 Ω
n1-1 (TRG-) - n1-3 (TRG+)	Lock switch not pushed	10 kΩ or higher
n1-1 (TRG-) - n1-3 (TRG+)	Lock switch pushed	Below 1 Ω

Fig 1: Inspecting Entry Lock And Unlock Switch

G04049969

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002