FixVault
Home › Lexus › 2006 › IS 350 › Repair and Diagnosis › External Pages › Different car › Section 14 (Starting (4GR-FSE)) › Engine Switch › Installation

Engine Switch: Installation

WARNING: This page is about a different car, the 2006 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL ENGINE SWITCH 
    1. Attach the 2 claws to install the switch.
    2. Connect the switch connector.
      Fig 1: Identifying Engine Switch
      G04045036Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (w/o Navigation System) (See step 4 in  INSTALLATION  ) 
  3. INSTALL MULTI-DISPLAY WITH RADIO RECEIVER ASSEMBLY (w/ Navigation System) (See step 8 in  INSTALLATION  ) 
  4. INSTALL CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL (See step 40 in  INSTALLATION  ) 
  5. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY (See step 41 in  INSTALLATION  ) 
  6. INSTALL CONSOLE BOX (See step 42 in  INSTALLATION  ) 
  7. INSTALL CONSOLE BOX REGISTER ASSEMBLY (See step 43 in  INSTALLATION  ) 
  8. INSTALL FRONT ASH RECEPTACLE SUB-ASSEMBLY (See step 44 in  INSTALLATION  ) 
  9. INSTALL FRONT CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission) (See step 45 in  INSTALLATION  ) 
  10. INSTALL REAR CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission) (See step 46 in  INSTALLATION  ) 
  11. INSTALL CONSOLE PANEL SUB-ASSEMBLY (for Automatic Transmission) (See step 47 in  INSTALLATION  ) 
  12. INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH (for Automatic Transmission) (See step 48 in  INSTALLATION  ) 
  13. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH (for Automatic Transmission) (See step 49 in  INSTALLATION  ) 
  14. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission) 
  15. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transmission) 
About FixVault