FixVault
Home › Lexus › 2006 › RX 330 AWD › Repair and Diagnosis › Body & Frame › Door Locks › Door Lock › Door Control Switch › Inspection

Door Control Switch: Inspection

  1. INSPECT DOOR CONTROL SWITCH (PASSENGER SIDE) 
    1. Measure the resistance according to the value(s) in the table below.

      Standard resistance 

      STANDARD RESISTANCE TABLE

      Tester Connection Condition Specified Condition
      2 - 3 Lock Below 1 Ω
      2 - 3 1 - 2 OFF (Free) 10 kΩ or higher
      1 - 2 Unlock Below 1 Ω
      Fig 1: Identifying Door Control Switch Lock And Unlock Positions (Passenger Side)
      G04092498Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      HINT:

      If the result is not as specified, replace the switch.

    2. Apply battery voltage to the door control switch and check that the switch illuminates.

      OK 

      MEASUREMENT SPECIFIED CONDITION TABLE

      Measurement Condition Specified Condition
      Battery positive (+) --> Terminal 4
      Battery negative (-) --> Terminal 2      		 Illuminates

      HINT:

      If the result is not as specified, replace the switch.

    Fig 2: Identifying Door Control Switch Illuminates
    G04092499Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault