Front Axle Hub: Disassembly

1. Remove the cotter pin and nut.
2. Using SST(s), remove the lower ball joint assembly front LH.
   Fig 1: Removing Cotter Pin And Nut

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   SST 09628-62011 

1. Using a screwdriver, remove the bearing dust deflector NO. 1 LH.

Fig 2: Removing Bearing Dust Deflector LH

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Using snap ring pliers, remove the front axle hub LH hole snap ring.

Fig 3: Removing Front Axle Hub LH Hole Snap Ring

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Using SST(s), remove the front axle hub subassembly LH.
   Fig 4: Removing Front Axle Hub Subassembly LH

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   SST 09520-00031 

2. Using SST(s) and a press, remove the bearing inner race (outside) from the front axle hub sub-assembly LH.

   SST 09950-00020, 09950-60010 (09951-00430), 09950-70010 (09951-07100) 

1. Using a torx wrench (T30), remove the 4 bolts and disc brake dust cover front LH.

Fig 5: Removing Disc Brake Dust Cover Front LH

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

HINT:

Torx is a registered trademark of Textron Inc.

1. Place the bearing inner race (outside) on the front axle hub LH bearing.
2. Using SST(s) and a press, press the front axle hub LH bearing until it contacts the SST(s).
   Fig 6: Removing Front Axle Hub LH Bearing

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   SST 09527-17011, 09950-60010 (09951-00600), 09950-70010 (09951-07100) 

3. Using a spanner to make the steering knuckle LH horizontal, fix it to the V block, as shown in the illustration.
   NOTE: Be sure the steering knuckle is horizontally positioned.
4. Using SST(s) and a press, remove the front axle hub LH bearing.

Fig 7: Removing Front Axle Hub LH Bearing

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

SST 09950-60010 (09951-00600), 09950-70010 (09951-07100)