Front Axle Hub: Reassembly

1. Using SST(s) and a press, install a new front axle hub LH bearing to the steering knuckle LH.

SST 09950-60020 (09951-00810), 09950-70010 (09951-07100) 

1. Place the disc brake dust cover front LH and using a torx wrench (T30), torque the 4 bolts.

Fig 1: Installing Disc Brake Dust Cover Front LH

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Torque: 8.3 N*m (85 kgf*cm, 74 in.*lbf) 

HINT:

Torx is a registered trademark of Textron Inc.

1. Using SST(s), and a press, install the front axle hub sub-assembly LH.

Fig 2: Installing Front Axle Hub Sub-Assembly LH

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

SST 09608-32010, 09950-60020 (09951-00810), 09950-70010 (09951-07100) 

1. Using snap ring pliers, install a new front axle hub LH hole snap ring.

Fig 3: Installing A New Front Axle Hub LH Hole Snap Ring

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Using SST(s) and a hammer, install the bearing dust deflector No. 1 LH.

Fig 4: Installing Bearing Dust Deflector

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

SST 09316-60011 (09316-00011, 09316-00031), 09608-32010 

HINT:

Align the hole for the speed sensor in the bearing dust deflector No. 1 LH with the steering knuckle.

1. Install the lower ball joint assembly front LH and tighten the nut.

   Torque: 123 N*m (1,250 kgf*cm, 91 ft.*lbf) 

2. Install a new cotter pin.