FixVault

Charging System: Precaution

NOTE: When disconnecting the negative (-) battery terminal, initialize the following systems after the terminal is reconnected.
SYSTEM AND INITIALIZATION TABLE

System Name See procedure
Lighting System (Adaptive Front-Lighting System) INITIALIZATION
Power Window Control System INITIALIZATION
Power Back Door System INITIALIZATION
Sliding Roof System INITIALIZATION and INITIALIZATION
  1. Check that the battery cables are connected to the correct terminals.
  2. Disconnect the battery cables when the battery is given a quick charge.
  3. Do not perform tests with a high voltage insulation resistance tester.
  4. Never disconnect the battery while the engine is running.
  5. Check that the charging cable is tightened on terminal B of the generator and the fuse box.