FixVault
Home › Lexus › 2006 › RX 330 FWD › Repair and Diagnosis › External Pages › Different car › Section 15 (Navigation System - Diagnostics) › BLUETOOTH Tel Check Mode

BLUETOOTH Tel Check Mode

WARNING: This page is about a different car, the 2006 Toyota 4Runner. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

Illustration may differ from the actual vehicle depending on the device settings and options. Therefore, some detailed areas may not be shown exactly the same as on the actual vehicle.

  1. ENTER DIAGNOSTIC MODE (See  DIAGNOSIS DISPLAY DETAILED DESCRIPTION   ). 
  2. BLUETOOTH TEL CHECK 
    1. Select "Bluetooth TEL Check" on the "Diagnosis MENU" screen.
      Fig 1: Display - Bluetooth TEL Check
      G04337788Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. BLUETOOTH CHECK 
    1. Select "Bluetooth Check" on the "Bluetooth Handsfree Check Menu" screen.
      Fig 2: Display - Bluetooth Check
      G04337789Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Select "Serial Communication Log" on the "Bluetooth Check Menu" screen.
      Fig 3: Display - Serial Communication Log
      G04337790Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. The communication log data in the display ECU are displayed on this screen.

      HINT:

      The displayed data can be used as a reference.

      Fig 4: Display - Communication Log Data
      G04337791Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Select "Software Version" on the "Bluetooth Check Menu" screen.
      Fig 5: Display - Software Version (1 Of 2)
      G04337792Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Check the software version of the Bluetooth module.
        Fig 6: Display - Software Version (2 Of 2)
        G04337793Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

    Screen Description: 

    SCREEN DESCRIPTION

    Display Contents
    General version /*1
    • General software version of Bluetooth module
    • If any of the API version, upper stack version, and low stack version is updated, the general version is upgraded.
    API version/*2 API software version is displayed.
    Upper Stack version/*3 Upper Stack version is displayed.
    Lower Stack version/*4 Lower Stack version is displayed.

    HINT:

    This function is controlled by the built-in display ECU.

  4. HANDSFREE VOICE QUALITY SET 
    1. Select "Handsfree Voice Quality Set" on the "Bluetooth Handsfree Check Menu" screen.
      Fig 7: Display - Handsfree Voice Quality Set
      G04337794Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Check the handsfree voice level.
      Fig 8: Checking Handsfree Voice Level
      G04337795Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

    Screen Description: 

    SCREEN DESCRIPTION

    Display Contents
    Received voice level adjustment/*1 Setting possible for the voice level received from Bluetooth compatible phones.
    Sent voice level adjustment/*2 Setting possible for the voice sent to Bluetooth compatible phones.

    HINT:

    This function is controlled by the built-in display ECU.

    NOTE: "Voice Quality Type" should not be changed.
About FixVault