FixVault

Speed Sensor: Inspection

  1. INSPECT SPEED SENSOR (NT SENSOR) 
    1. Disconnect the speed sensor connector from the transaxle.
    2. Measure the resistance according to the value(s) in the table below.

    Resistance: 

    TESTER CONNECTION AND SPECIFIED CONDITION

    Tester Connection Specified Condition 20°C (68°F)
    1 - 2 560 to 680 Ω
    Fig 1: Identifying Speed Sensor Connector Terminals
    G04088470Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSPECT SPEED SENSOR (NC SENSOR) 
    1. Disconnect the speed sensor connector from the transaxle.
    2. Measure the resistance according to the value(s) in the table below.

    Resistance: 

    TESTER CONNECTION AND SPECIFIED CONDITION

    Tester Connection Specified Condition 20°C (68°F)
    1 - 2 560 to 680 Ω
    Fig 2: Identifying Speed Sensor Connector Terminals - Sensor Side
    G04088471Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002